Magnetic Domain Optimization: Full-Process Demagnetization and Remagnetization Performance Testing for Servo Motors

End-to-End Solution for Magnetization Automation

Automated Magnetic Charging Integrated Solution

Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

In the field of industrial automation, servo motor as the core drive components, its performance stability is directly related to equipment efficiency and service life. High temperature, overload and other special working conditions can easily cause demagnetization of the motor magnet, which in turn leads to problems such as reduced speed and increased energy consumption. A batch of servo motors of an enterprise have been in high temperature operation for a long time and have been seriously demagnetized, which requires a professional treatment solution. Relying on more than 10 years of magnetizing technology accumulation, JiuJu Automation customized the "demagnetization - re-magnetization" full-process magnetic field adjustment solution for this enterprise, successfully restoring the magnetic properties of the motor and realizing the adaptation of magnetizing equipment, and the following is the complete record of this project.

Demagnetization Diagnosis: Pinpointing the Cause of Magnetic Energy Degradation

The customer sent two sizes of servo motor rotors to JiuJi's laboratory and the following data were obtained after Gaussmeter testing:

Small motors: 17.6 GS remanent magnetization before magnetization
Large motors: 140.2 GS remanent magnetization before magnetization

Through the polarity direction detection, it is found that the uniformity of the magnetic pole distribution of the motor has decreased, and the lack of magnetic flux density directly leads to the weakening of torque output. After analysis, the irreversible demagnetization triggered by the high temperature environment is the main problem, and the magnetic field needs to be adjusted and optimized with the help of high-precision magnetizing technology.

Technology Tackle: 3000V High Power Magnetization System Solution

For the customer's batch motor processing needs, JiuJi adopts the combination solution of MA-3050 magnetizer with CS-60 magnetizing coil, whose core technical advantages are as follows:

1.High-voltage energy storage transient discharge:Using 3000V high-voltage capacitor for energy storage, releasing 3000A peak current for the magnetizing coil in microsecond time, the resulting instantaneous magnetic field strength can be up to 5T (Tesla), which is far more than the endowed coercive force (Hcj) of the magnetic material, guaranteeing that the magnetization reaches the saturation state.

2.Dual equipment working in tandem:Mainframe MA-3050: Precise control of voltage, capacitance and discharge timing ensures the stability of the magnetization process;

3. Magnetizing coil CS-60: customized design, can be adapted to different sizes of rotors, magnetic field uniformity error control at <2%.

4.Verification of Faraday's law of electromagnetic induction:The discharge waveforms were monitored by an oscilloscope, confirming that the magnetic field strength was linearly related to the magnetizing energy, and the measured data matched the theoretical model with 99.71 TP3T.

III. Effectiveness verification: magnetic energy density restored to the initial standard

After 3 cycles of magnetizing operation, the magnetic parameters of the motor show significant optimization:

Small motors: 1543GS remanent magnetization after magnetization.
Large motors: remanent magnetization up to 2301GS after magnetization

The result of the speed test shows that under the rated load condition, the speed fluctuation rate of the motor is optimized from ±8% to ±1.5%, and the torque output is restored to the nominal value of 98%, which can be fully adapted to the customer's actual use in the production scenario.

Optimization: Recommended Economy of MA-3030 Magnetizing System

Based on the actual test data, JiuJi recommends the combination of MA-3030 magnetizer (3000V/3000μF) and CS-60 magnetizing coil, with the following core advantages:

1. Reduced cost and adaptability: Compared with the MA-3050 model, the MA-3030 magnetizer can still reach 4500J of magnetizing energy after optimizing and adjusting the capacitance capacity, which can satisfy the customer's needs for the magnetizing operation of motor models above 90%;

2. Temperature control protection design: it can be used with ice water machine (optional), which can be adapted to high-frequency magnetization operation scenarios and help extend the stable use cycle of the equipment.

With the MA series intelligent magnetizing system, JiuJi Automation has created a closed-loop solution to regenerate the magnetic energy of industrial motors. In response to the actual problem of high-temperature demagnetization of a customer's batch servo motors (the residual magnetism of small-sized motors was recovered from 17.6Gs to 1543Gs, and that of large-sized motors from 140.2Gs to 2301Gs), JiuJi Automation adopts the high-pressure pulse technology of 3000V/3000μF, and realizes the motor's magnetic performance of 102% by using the combination of the MA-3050 mainframe and the CS-60 coils. Recovery effect.

Compared with the traditional way of replacing motors, this solution can save the costs related to 82%, and at the same time, it provides 3-year warranty service, which has already been formed into a standardized service package (including the MA-3030 basic set and anti-oxidation value-added services). In the future, JiuJu Automation will continue to invest in the research and development of gradient magnetization, intelligent temperature control and other core technologies to help optimize and upgrade the whole life cycle management of manufacturing equipment.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

春風啟新程，實干赴新篇｜久巨自動化 2026 開工大吉

2026年2月25日

Automated Magnetic Charging Integrated Solution 充磁設備充磁自動化磁測量儀器充磁服務春回大地啟新章，奮楫揚帆赴新程。2026年農歷正月初八，正值新春開工吉日，久巨自動化暖意盎然、生機勃發，全體同仁褪去新春的閑適，以飽滿的熱忱、昂揚的姿態齊聚廠區，共同開啟新一年的奮斗之旅，用實干踐行初心，用奮進書寫榮光。上午8時整…

久巨充磁案例：硅膠磁材產品的充磁全流程記錄

2026年2月25日

Automated Magnetic Charging Integrated Solution 充磁設備充磁自動化磁測量儀器充磁服務在工業制造領域，硅膠磁性產品因兼具柔性特質與磁性能，廣泛應用于智能穿戴、密封組件等場景。其磁性能的精準賦予，核心依賴專業充磁工藝。本次久巨充磁承接硅膠產品充磁項目，成功實現產品磁力從0.01高斯到15.5高斯的跨越式提升，以下為全流程詳…

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

2026年2月27日

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

一文讀懂：電機充磁原理、必要性與永磁電機底層邏輯

2026年2月26日

Automated Magnetic Charging Integrated Solution 充磁設備充磁自動化磁測量儀器充磁服務電機充磁，是永磁同步電機、無刷直流電機等永磁電機制造與維護的核心步驟。它依托電磁感應與磁場能量轉換原理，借助外部強磁場讓永磁體內部磁疇定向排列，從而形成穩定持久的磁性，是保障電機正常運行的基礎環節。一、充磁的本質：為電機賦予…