Can improper wiring of multi-stage magnetizers affect equipment operation? A complete guide to proper operation!

End-to-End Solution for Magnetization Automation

Automated Magnetic Charging Integrated Solution

Magnetizing Equipment

Magnetization Automation

Magnet Measuring Instruments

Magnetization Services

In industrial production scenarios, JiuJi multi-stage magnetizers are the core equipment for magnetization of all kinds of magnetic materials and play an indispensable role. But do you understand that improper wiring operation may cause equipment failure, abnormal performance and other problems, affecting production efficiency and equipment life? The following is a detailed explanation of its standardized wiring process and operation points.

The effects of improper wiring practices need to be focused on

In the field of motors, if there is a deviation in the winding wiring, such as mistakenly connecting the star method to the triangle method, it will lead to single-phase windings being subjected to excess voltage, which will lead to generator failure due to current overload. Similarly, if the wiring of JiuJi multi-stage magnetizer is not standardized, it will cause the current direction to be inconsistent with the original design of the equipment, and it is easy for the local current to increase abnormally. This can cause damage to core components such as magnetizing coils due to high temperature rise, and may also induce short-circuit problems, leading to abnormal operation or even damage to the equipment, ultimately incurring high maintenance expenses and causing production interruptions.

Specification wiring operation steps in detail

Before operation, the appearance of the equipment should be thoroughly inspected to make sure that the equipment has no signs of damage, the lines are firmly and reliably connected, and the indicators and meters can be normally displayed and function. Especially critical is the need to complete the grounding of the magnetizer according to the norms, which is an important prerequisite to reduce the potential risk of power leakage and to ensure the safety of the operators and the stable operation of the equipment.

The wiring process should strictly follow the standard procedure of the equipment: the positive pole of the magnetizing coil should be connected correspondingly with the positive pole of the output of the magnetizer (routinely distinguished by a red marking), and the negative pole should be accurately docked with the negative pole of the output of the magnetizer (routinely distinguished by a black marking); the footswitch should be correctly inserted into the "external control socket" designated by the magnetizer, to ensure the normal transmission of signals.

In terms of power supply access, it is necessary to use power cords in accordance with national standards, and the cross-sectional area of the cords should be not less than 6㎜2, and the supporting power switch should be a leakage protection switch with a rated current of not less than 63A to ensure the safety of electricity consumption. In addition, JiuJi multi-stage magnetizer adopts two-phase four-wire wiring system, and the specific wiring details can be found in Chapter 5 of the equipment manual for detailed guidelines.

After the wiring is completed, turn on the power supply of the magnetizer, at this time, the power indicator should light up normally, and the voltmeter synchronously displays the input voltage, indicating that the equipment power supply status is normal.

Before placing the workpiece to be magnetized, the appropriate magnetizing coil should be selected in accordance with the material, specification and target magnetic performance requirements of the workpiece, and the capacitance and charging voltage parameters should be reasonably matched. The workpiece should be placed smoothly in the specified precise position of the magnetizing coil to ensure that the workpiece and the coil are tightly fitted and correctly positioned, so as to avoid uneven magnetizing effect due to positional deviation.

Subsequently, key parameters such as charging voltage and magnetizing time are set on the equipment's operating panel according to process requirements. For initial operation, refer to the recommended parameter values in the equipment's manual, and then fine-tune and optimize them according to the actual magnetizing effect.

After pressing the "Charge" button, the device will enter the rapid energy storage phase. When the capacitor voltage reaches the preset parameter value, the "Charge Complete" indicator will light up synchronously, at this time, you can press the "Magnetize" button, the device will generate a pulse current flow through the magnetizing coil, forming a strong magnetic field, so as to complete the workpiece magnetization operation.

After the magnetization process, before removing the workpiece, it is recommended to use Gaussmeter and other professional testing equipment to test the magnetic flux of the workpiece to confirm that the magnetic performance indexes are in line with the process requirements.

Magnetization of Magnetic Materials

3C Electronic Magnetization

Motor Rotor Magnetization

Car Speaker Magnetization

New Energy Vehicle Industry

Medical Equipment Industry

春風啟新程，實干赴新篇｜久巨自動化 2026 開工大吉

2026年2月25日

Automated Magnetic Charging Integrated Solution 充磁設備充磁自動化磁測量儀器充磁服務春回大地啟新章，奮楫揚帆赴新程。2026年農歷正月初八，正值新春開工吉日，久巨自動化暖意盎然、生機勃發，全體同仁褪去新春的閑適，以飽滿的熱忱、昂揚的姿態齊聚廠區，共同開啟新一年的奮斗之旅，用實干踐行初心，用奮進書寫榮光。上午8時整…

久巨充磁案例：硅膠磁材產品的充磁全流程記錄

2026年2月25日

Automated Magnetic Charging Integrated Solution 充磁設備充磁自動化磁測量儀器充磁服務在工業制造領域，硅膠磁性產品因兼具柔性特質與磁性能，廣泛應用于智能穿戴、密封組件等場景。其磁性能的精準賦予，核心依賴專業充磁工藝。本次久巨充磁承接硅膠產品充磁項目，成功實現產品磁力從0.01高斯到15.5高斯的跨越式提升，以下為全流程詳…

JiuJu Magnetic Stripe Magnetization Video Case: Medical Magnetic Stripe Magnetization

January 7, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Services Magnetic stripes are widely used in medical cards, medical insurance cards and other medical credentials to store key data such as basic patient information and medical insurance participation information. Due to the frequency of use and the external environment, the magnetic stripe may become magnetically weakened or demagnetized, resulting in the inability of the equipment to read the information, and then need to be magnetized. The core principle of magnetization is to make the magnetic strip inside the...

JiuJu Magnetizing Video Case: Rubber Silicone and NdFeB Magnetizing

January 6, 2026

Automated Magnetic Charging Integrated Solution Magnetic Charging Equipment Magnetic Charging Automation Magnetic Measuring Instruments Magnetic Charging Service This paper focuses on the core process of magnetization of Rubber Silicone and NdFeB, the initial state of non-magnetic before magnetization, and the magnetic performance after magnetization. Through the gaussmeter measurement verification, it is clear that the highest magnetic unit after magnetization is up to 45.9 units and the highest magnetic unit after magnetization is up to 45.9 units (measured by gaussmeter). The magnetization process is the core link to realize the magnetic transformation of the two...

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

2026年2月27日

久巨充磁案例-古董音響喇叭充磁修復，技術與實例介紹

一文讀懂：電機充磁原理、必要性與永磁電機底層邏輯

2026年2月26日

Automated Magnetic Charging Integrated Solution 充磁設備充磁自動化磁測量儀器充磁服務電機充磁，是永磁同步電機、無刷直流電機等永磁電機制造與維護的核心步驟。它依托電磁感應與磁場能量轉換原理，借助外部強磁場讓永磁體內部磁疇定向排列，從而形成穩定持久的磁性，是保障電機正常運行的基礎環節。一、充磁的本質：為電機賦予…